CineReady

Support

A light meter, sun planner and scouting log for filmmakers, built for iPhone.

Need help or found a bug? Open an issue on GitHub. Include your iPhone model, iOS version and what you were measuring. Replies usually come within a few days.

Getting started

CineReady opens on the camera. Choose Color, Exposure, Frame and Flicker at the top. The big reading updates as you move, and a tap on it holds the value. The shutter button saves the frame with every reading, the time and the place to your library.

Common questions

How accurate is the Kelvin reading?

Readings marked ≈ come from the iPhone camera, so treat them as estimates for comparing and matching. Scene mode follows the camera's auto white balance, which can read a few hundred Kelvin high under tungsten. For the best results, use Spot on a grey card, or calibrate each lens against your colour meter in the meter settings.

What do G and M mean on the tint reading?

CineReady uses colour-meter convention: G means the light is green (add magenta, or minus green) and M means it is magenta (add plus green).

How does the flicker check work?

Set your mains frequency in Settings (50 or 60 Hz; it defaults to your region). Flicker mode tells you whether your shutter angle and frame rate will flicker under mains-powered lights, and offers safe values with one tap. The light test measures the lights in front of you. Very fast LED dimming, above about 1 kHz, can't be detected by the iPhone camera.

The sun path doesn't line up with the real sun.

Sun POV and skyline tracing depend on the iPhone compass, which is accurate to about 5–15°. Move away from steel stands, vehicles and magnets, and calibrate the compass when iOS asks.

The planner shows no forecast.

Forecasts come from Apple Weather and need a connection the first time. They're then saved for offline use. Sun times always work offline.

Where are my shots stored?

Only on your iPhone, inside CineReady. Deleting a shot or the app removes it. See the privacy policy for details.